Set(4)1.5'' 6X5.5'' Wheel Spacers Adapters 108mm M14x1.5 For Silverado Sierra For Sale - New and Used

【Package includes】 4 hubcentric wheel spacers (1.5" per unit), 2 high strength thread-locking (red), 2 user manuals.

【Benefits】 CNC processed for high accuracy and stability (+/-0.02mm). Made from 6061-T6 aluminum forged alloy material. High-quality heat-treated 12.9 grade studs pre-installed.

Compatible with:

1999-2022 Silverado 1500, 2001-2022 Tahoe

2000-2014 Suburban 1500, 2007-2013 Avalanche

2002-2006 Avalanche 1500, 1992-1994 Blazer

2003-2014 Express 1500, 1996-2002 Express 2500

2003-2022 Express 2500 (ONLY 6 Lugs)

1988-2000 C2500 (ONLY 6 Lugs)

1988-1999 K1500 , 1988-2000 K2500 (ONLY 6 Lugs)

1999-2022 Escalade

2007-2022 Sierra 1500

1992-2006 Suburban 1500

2015-2022 Yukon XL

1991-1999 Yukon 4WD

2000-2022 Yukon

2003-2014 Savana 1500

2003-2005 your wheels 1.5 inches outward

Allows installation of wider wheels & tires

Increases your vehicle's track-width

Hydraulic Pre-Pressed Studs eliminate the risk of vibrations

Improves the look of your vehicle

Wheel Spacer Specifications:

Quantity: Four (4)

Thickness: 1.5" (38.1mm)

Bolt Pattern: 6x5.5(6x139.7mm)

Center Bore: 108mm

Stud/Nut Thread Pitch: M14x1.5

Package Includes

4 Pcs Wheel Spacers Adapters

*If you don't make sure whether this item fits to you, message us with your vehicle year, maker and model,

we will find the item you need.*

Please confirm this item fits for your vehicle before purchasing

(Check Fitment Data Above or see description below).

Installation Procedure

Step 1:

• Following your vehicle owner's manual, proper raise the vehicle and support it using adequately

load-rated jackstands.

• Remove wheels and inspect rotors for any damage or cracks. If any damage is identified,

don't continue with this installation.

• Remove any wheel visible rust from the mating flange on the vehicle's rotor. Check both the rotor

and wheel mounting flanges for burns, rivet heads, or other obstruction which could prevent proper

seating of the spacer/adapter.

Step 2:

• If proper seating can be achieved, apply provided thread locker to vehicle's studs and mount the

wheel spacers on to rotor by torquing provided wheel spacers/adapter lug nuts.

Tighten all lug nuts to the appropriate torque specification using a torque wrench.

• Install wheel on to wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate

torque specification using a torque wrench.

• DO NOT USE AN IMPACT WRENCH.

Step 3:

• Check that wheel and tire clearance allow for full there is no interference, vehicle may be lowered.

• Re-check torque after traveling the first 50-100 miles, then again every 2000-3000 miles.

Important Note

1.Please verify the bolt count, bolt circle diameter, center bore, and bolt size match your vehicle before ordering.

2.We recommend getting this kit installed by a trained professional, but it is not necessary.

3.We don't recommend to install the bolt nuts by electronic tool, it is best by manual.

Installation Advice

Clean the studs thoroughly and remove any excessive dirt, oil, grease etc.

Highly recommended use torque wrench while installing wheel spacers.

Don't using an impact wrench because improper usage may cause the lug nuts and bolts to loosen or break while driving causing a potential injury .

Please check all lug nuts and re-torque them after driving 20-60 miles,then re-torque again after driving 2000-3000 miles.

Highly recommended professional installation.

AFTER-SALES: If there are any problems during the purchase of the product, Please let us know,our professional team will deal with and help you to solve the problem ASAP.