Motul RBF 700 Factory Line Synthetic DOT 4 Racing Brake Fluid 500ml - 111257 NEW For Sale - New and Used

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Motul RBF 700 Factory Line Synthetic DOT 4 Racing Brake Fluid 500ml - 111257 NEW:
$31.95

For sale is (1) BRAND NEW 2022 MOTUL RBF 700 Factory Line Racing Brake Fluid .5 Liter bottle. Ships same day if ordered M-F before 4PM PST. Returns accepted in unopened and SEALED condition ONLY.

For hydraulic actuated brake and clutch systems 100% Synthetic Racing Fluid – DOT 4

Very high boiling point: 336°C / 637°F.

Application

Motul (Racing Brake Fluid) RBF 700 is a high-performance brake fluid developed to offer highly consistent and maximum braking power at the extremes of brake temperature generated by racing carbon and ceramic brakes.

Allows to minimize air vents of the brakes thus improving aerodynamic drag.

Can be used with conventional steel discs.

Can be used for clutch systems actuators.

RBF 700 responds to DOT 4 standard allowing the fluid to be used in high performance vehicles for road application.

Features and Benefits

STANDARDS:FMVSS 116 DOT 4

Extreme thermal resistance and stability:

MOTUL RBF 700 FACTORY LINE very high dry boiling point (336°C / 636.8°F) is superior to all conventional brake fluids DOT 5.1 (260°C / 500°F mini) and DOT 4 (230°C / 446°F mini), and therefore enables effective braking in most extreme conditions.

Provides better aerodynamic performance by reducing air entrance for brake cooling.

Efficient when rainy:

MOTUL RBF 700 FACTORY LINE has a very high wet boiling point (205°C / 401°F) which is superior to conventional brake fluids DOT 5.1 non-silicone base (180°C / 356°F mini) and DOT 4 (155°C / 311°F mini), and therefore enables to keep efficient braking
in wet conditions.

Brake fluids tend to absorb humidity from the air, which reduce boiling point and increase the risk to get to “vapor lock” phenomena.

The wet boiling point is measured by humidifying the product with 3% of water.

Recommendations

Avoid mixing with polyglycol based brake fluids.
Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).
Store brake fluid in its original container, tightly closed to prevent moisture absorption.
Aggressive chemical product if contact with hands, paint or varnish.

If skin contact, rinse thoroughly with at 100°C (212°F)2.1 mm²/sViscosity at -40°C (-40°F)1,580.0 mm²/sDry boiling point336.0 °C / 637.0 °FWet boiling point205.0 °C / 401.0 °F