INFINITY REFERENCE series 1030w subwoofers 10\" PAIR. Condition is Used. Shipped with FedEx Ground.
These subs are in good working condition and have not been used very much. One sub is missing the small plastic knobs for the terminals, but the wire can still be tightened on without issue. Features & specs Features and Specs Size 10 -inch Impedance (Ohms) --- Cone Material Polypropylene Surround Material Rubber Port diameter (inches) 3 Port length (inches) 9.01 Free-Air No Dual Voice Coil No Sensitivity 88 dB at 2.83 volts
Frequency Response 25 - 400 Hz Max RMS Power Handling 250 Peak Power Handling (Watts) 1000 Top Mount Depth (inches) 5 9/16 Bottom Mount Depth (inches) 6 3/16 Cutout Diameter or Length (inches) 9 1/4 Frame Width 10.382 Frame Length 10.382 Vas (liters) 35.72 Fs (Hz) 29.62 Qts 0.39 Xmax (millimeters) 12.25
Box Requirements Ideal Sealed Box Volume (cubic feet) 0.75 Minimum Sealed Box Volume (cubic feet) 0.75 Maximum Sealed Box Volume (cubic feet) 0.75 Ideal Ported Box Volume (cubic feet) 1.75 Minimum Ported Box Volume (cubic feet) 1.75 Maximum Ported Box Volume (cubic feet) 1.75 The Infinity Reference 1030w replaces these items:
Product Research
Features
Enclosure Compatibility
Features
High-efficiency Polypropylene WooferCone: This lightweight and popular material is used to ensure maximum wooferefficiency. The benefit is high output with modest amplifier power.
Large-roll Rubber Surround: Thelarge-roll rubber surround provides optimum cone-edge suspension and absorbsdistortion that may travel up the cone edge, ensuring clean, tight bass.
Proprietary Deep-draw I-beam Basket:The deep-draw I-beam design allows room for a longer motor structure, whichprovides increased bass output. This basket is also more rigid and has a lowerbasket resonance.
Vented Polepiece: The ventedpolepiece provides additional cooling of the motor structure. The subwoofer\'sthermal capabilities are augmented, thus increasing power handling.
Progressive Spider: Thesubwoofer uses a progressive spider, which provides better control at excursionlimits than more commonly used linear spiders. The result is reduced distortionat high output levels.
Gold-plated Binding Posts: Thegold-plated binding posts will accept pin connectors, spade connectors, bananaplugs, and bare wire.
Note: The binding posts are positioned too far apart to accept dual banana plugs.
EnclosureCompatibility
Recommended Sealed BoxVolume: Infinity recommends a sealed enclosure with an internal volumeof 0.75 cu/ft.
Recommended Ported BoxVolume: Infinity recommends a ported enclosure with an internal volumeof 1.75 cu/ft with one 3\" diameter x 9.01\" long port.
Recommended SealedBandpass Box Volume: Infinity recommends a sealed bandpass enclosurewith an internal volume of 2.0 cu/ft. The enclosure has a sealed chamber volumeof 1.0 cu/ft and a ported chamber volume of 1.0 cu/ft with one 4\" diameterx 7.87\" long port.
![INFINITY REFERENCE series 1030w subwoofers 10\](parts-image-large/g/biEAAOSwp1dl8jIa/s-l1600/INFINITY-REFERENCE-series-1030w-subwoofers-10-PAIR.jpg "INFINITY REFERENCE series 1030w subwoofers 10\")
