2002 Aston Martin V12 Vanquish Pictures, Specifications, and Information

Fast-Autos.net


Home - Makes - Aston Martin - 2002 Aston Martin V12 Vanquish

2002 Aston Martin V12 Vanquish Pictures, Specifications, Information

Follow fastautosnet on Twitter

specifications information


General Information
Vehicle Type: 2-door coupe, production car
Price: $228,000
Miles Per Gallon: 11/18 mpg
Drivetrain
Configuration Front Engine/RWD
Engine: V12
Displacement: 5935 cc
Horsepower: 460 bhp @ 6500 rpm
Torque: 400 lb-ft @ 5000 rpm
Max RPM: 7000 rpm
Transmission: 6-Speed Manual
Dimensions
Weight: 4100 lbs
Height: 51.9 in
Length: 183.7 in
Width: 75.7 in
Wheelbase: 105.9 in
Track: f: 61.2 / r: 60.4 in
Performance
0-60 mph: 4.4 sec
0-100 mph: 10.3 sec
Quarter Mile: 12.9 sec @ 115 mph
Top Speed: 190 mph
Lateral Acceleration: .91g
Braking, 60-0 mph: 130 ft
Slalom Speed: --.- mph
Nürburgring Lap Time: --.- minutes
The most sophisticated and technologically advanced new model ever to be designed, developed and built by Aston Martin made its debut at the 2001 New York International Auto Show.

With a maximum speed in excess of 300 km/h (190 mph) and a 6.0 liter V12 engine developing 460 horsepower, the totally new Aston Martin V12 Vanquish went on sale in September of 2001 and carried an MSRP of $228,000. It was built at Newport Pagnell and becomes Aston Martin’s new premier, top of the range, flagship model.

Available as either a two or two plus two seat coupe the V12 Vanquish will accelerate to 60 mph in under 4.5 seconds (0-100 km/h in under 5.0 seconds) and 160 km/h (100 mph) in under 10 seconds. Through the application of advanced design techniques and materials it is lighter, stiffer and stronger and offers superior performance to that of the V8 engined Vantage model which it replaces.

In conjunction with the electronic drive-by-wire throttle system, which is fitted to the second generation 460 horsepower 6.0 liter V12 Aston Martin engine, fingertip controlled Formula 1 style paddles enable almost imperceptible gear changes to be completed in under 250 milliseconds – less than the blink of an eye.

Advanced electronics also permit the close ratio six speed manual transmission to be programmed to operate automatically with the added facility of a special program tailored to winter driving conditions.

With close co-operation and technical assistance from the Ford Research & Vehicle Technology Group and Ford Research laboratories the new V12 Vanquish represents the largest ever investment by Aston Martin in advanced technology and it pioneers a series of world firsts in its design and construction. The main body structure utilizes carbon fiber, extruded aluminum and composite materials bonded together to form a central monocoque safety cell with additional deformable composite structure energy absorbent zones at both front and rear. It provides high standards of efficiency, structural integrity, torsional rigidity and occupant crash protection.

The V12 Vanquish is being offered for sale throughout the world with more than 70% of the annual production of 300 cars scheduled for customers outside the UK. Advance orders from customers in the USA will account for more than 30% of all sales during the second half of 2001.

A Design Classic

International award winning designer Ian Callum’s elegant, classic body design which reflects the pedigree, heritage and tradition of Aston Martin is both bold and dynamic with finely detailed features for the interior and the exterior.

With the capacity to continue to turn heads the design of the V12 Vanquish is already established as a modern classic. Perfectly proportioned from every aspect, Ian Callum’s design confirms the promise of outstanding "Supercar" performance and the impeccable pedigree of the V12 Vanquish as the new flagship of Aston Martin. Every carefully detailed feature provides graphic evidence of the painstaking craftsmanship and quality which is invested in its construction.

The distinctive radiator grille and lower air intake, which have become the hallmarks of a modern Aston Martin, are flanked by the equally bold and distinctive auxiliary driving lamps and front direction turn indicators. Both the front wings and bonnet panels incorporate a series of finely detailed compound curves which sweep back to the steeply raked windscreen pillars and low curving roof line.

Deeply sculptured sill and door panels accentuate Ian Callum’s classic design for this most modern of Aston Martins while the prominent rear wheel arches with the short tail section and rear spoiler incorporated in the boot lid complement the classic overall proportions of the V12 Vanquish.

All the exterior body panels are constructed from aluminum with each individual panel hand tailored to the central structure to ensure a perfect panel fit.

The V12 Vanquish is available as either a two or two plus two seat coupe with each and every model hand-built, finished and equipped to the exact and individual requirements of its customer. The new V12 Vanquish benefits from the most comprehensive and exhaustive test program ever to be undertaken by Aston Martin with 50 prototypes covering more than 1.6 million kilometers (1.0 million miles). Components and systems were subjected to a series of exhaustive trials on test rigs in Ford Research and Development Centers in Britain, mainland Europe and the United States. In order to assess the integrity and durability of the bonded body structure an environmental wind tunnel was employed to subject a Vanquish body to extremes of temperature ranging from minus 40°C to plus 81°C.

In addition to high speed endurance and accelerated durability trials for vehicles and components completed at Ford and component manufacturers proving grounds in Australia, the USA, Canada and Europe, Lotus Engineering were contracted to assist with the development of this totally new car from Aston Martin.

At the concept stage the new V12 Vanquish was previewed at a series of international motor shows in North America and Europe during the first half of 1998.

Such was the response to Project Vantage that immediately following its public unveiling at the North American International Auto Show in January 1998 the decision was taken to proceed with production.

"The wealth and abundance of expertise and technology which is now available to Aston Martin is reflected throughout this new model," said Dr Ulrich Bez, Chief Executive of Aston Martin. "However it is technology which is appropriate to an Aston Martin and complementary to the unique individual skills and expertise of our craftsmen. It is all technology which is targeted and tailored to provide positive benefits to all our customers.

The Body Structure

The main body structure of the new V12 Vanquish including the floor and the front and rear bulkheads is formed from extruded aluminum sections bonded and riveted around the central transmission tunnel which is constructed entirely from carbon fiber.

Single piece composite inner body side sections with carbon fiber windscreen pillars are also bonded to the central structure to create a high strength safety cell.

The precise, computer controlled, manufacturing processes which have been developed in Cupertino with Ford Research Laboratories and Nottingham University for the construction of the composite sections and the carbon fiber windscreen pillars are unique to the production of this latest Aston Martin.

Immediately ahead of the driver and passenger compartment a steel, aluminum and carbon fiber subframe carries the engine, transmission and front suspension and is bolted directly to the front bulkhead. There is a further deformable composite structure which employs the distinctive Aston Martin mesh air intake grille as a stressed member located ahead of the engine and front suspension to provide additional crash protection and accommodate the engine, transmission and air conditioning radiators and intercoolers. A completely flat surface has been developed for the underbody enabling air to be channeled into a Venturi section at the rear to assist high speed aerodynamics.

At the rear the composite floor, parcel shelf and side rails of the luggage compartment are also designed to provide additional deformable crash protection together with the extruded aluminum side impact beams located in the doors.

All of the exterior panels, including the roof, bonnet, boot lid, front and rear wings and doors are produced from "super-plastic-formed" and pressed aluminum. However each individual panel is tailored and bonded to the central structure by hand to ensure a perfect fit and finish.

There is a limitless range of body colors and a limitless choice of Connolly hide upholstery for the air-conditioned interior. Each body receives eight coats of paint with eight Connolly hides and 12m² of Wilton carpet being used to complete the furnishing of the interior.

Engine

Further development of Aston Martin’s low emissions all alloy twin overhead camshaft 48 valve 6.0 liter V12 engine with new design inlet manifolds, camshafts, valve gear, crankshaft and exhaust system has generated a 10% increase in power.

With the catalysts located immediately adjacent to the exhaust manifold they achieve optimum operating efficiency within 30 seconds to further reduce emissions. To ensure that heat from the engine and exhaust system is insulated from the body structure the entire exhaust system and the front bulkhead is clad in a heat resistant material first developed within the aerospace industry. A unique engine oil to water heat exchanger accelerates and assists operating efficiency together with an ionized gas misfire detection system which provides continuous monitoring of each of the engine’s 12 cylinders.

Transmission

The six speed close ratio manual transmission which is installed in the new V12 Vanquish is linked to the electronic drive-by-wire throttle and controlled through twin paddles mounted on the steering column. Developed in conjunction with Magnetti-Marelli and Ford RVT the advanced paddle shift gear change incorporates electronics matched to hydraulics to facilitate instantaneous gear changes. Sophisticated electronics also permit the manual transmission to operate automatically with the additional facility of a program for winter driving conditions which automatically reduces the power and torque of the engine.

Brakes, Suspension and Steering

Anti-lock ventilated and drilled 355mm (front) and 330mm (rear) diameter Brembo disc brakes are fitted to the aluminum alloy road wheels together with variable ratio power steering and independent front and rear suspension systems which incorporate forged aluminum wishbones and cast aluminum front suspension uprights. The rear axle is equipped with a limited slip differential in tandem with electronic traction control which senses potential wheel slippage and automatically reduces engine power and if necessary applies the rear brake system. The Yokohama 255/40 ZR 19 front and 285/40 ZR 19 rear tires, which have been designed exclusively for the V12 Vanquish and carry the AML initials, are mounted on 19" diameter wheels with 228 mm (9") width rims at the front and 254 mm (10") width rims at the rear. Individual tire pressures and temperatures are monitored through an automatic electronic sensing system.

Interior

Owners of the new Aston Martin V12 Vanquish are invited to Newport Pagnell in advance of production to select the body color and Connolly hide upholstery scheme and either the two or two plus two seat configuration.

A deep center console unit separates the driver and front passenger seats and incorporates a red engine starter button, the sound system and the climate control system. The white faced major instruments and message center which can relay information in eleven different languages have been designed in conjunction with Visteon. They are grouped in a binnacle directly in front of the driver with the gear change paddles mounted on the steering column.

The overall interior design is a subtle blend of traditional, classic and modern materials with Connolly hide upholstery matched to contemporary metal interior fittings and finishes. Both the windscreen wipers and lighting system can be programmed to operate automatically. Satellite navigation is also available together with many other features which can be installed to satisfy individual requirements of customers.

photos
Image Credits: Aston Martin

Aston Martin V12 Vanquish UK Made Direct Fit Sports Sound Free Flow Muffler picture

Aston Martin V12 Vanquish UK Made Direct Fit Sports Sound Free Flow Muffler

$1500.00



Aston Martin DB9 , DB7 VANTAGE , VANQUISH Mirror Glass Set  Heating (2004-2012) picture

Aston Martin DB9 , DB7 VANTAGE , VANQUISH Mirror Glass Set Heating (2004-2012)

$250.99



Aston Martin V12 Vanquish Right Door Mirror Side Mirrors picture

Aston Martin V12 Vanquish Right Door Mirror Side Mirrors

$535.14



ASTON MARTIN RAPIDE VANQUISH 6.0 V12 EXHAUST CATALYST CONVERTER picture

ASTON MARTIN RAPIDE VANQUISH 6.0 V12 EXHAUST CATALYST CONVERTER

$2750.00



Offer Aston Martin V12 Vanquish Complete 19

Offer Aston Martin V12 Vanquish Complete 19" Wheel Set - 4 x Wheels

$1735.00



Aston Martin V12 Vanquish 2001-07 Rear Right Brake Caliper Brembo picture

Aston Martin V12 Vanquish 2001-07 Rear Right Brake Caliper Brembo

$345.50



2001-2006 ASTON MARTIN V12 VANQUISH 19

2001-2006 ASTON MARTIN V12 VANQUISH 19" OEM REAR WHEEL RIM

$499.99



Aston Martin Colour And Trim DB9 V8 Vanquish TOP Original Dealer Sales Brochure picture

Aston Martin Colour And Trim DB9 V8 Vanquish TOP Original Dealer Sales Brochure

$24.99



AG43-6714-AA Aston Martin DB7 DB9 V8 DBS V12 Vanquish Rapide Virage Oil Filter picture

AG43-6714-AA Aston Martin DB7 DB9 V8 DBS V12 Vanquish Rapide Virage Oil Filter

$53.99



2014-2018 Aston Martin V12 Vanquish Rear Bumper Upper Cover CD33-17K835 OEM picture

2014-2018 Aston Martin V12 Vanquish Rear Bumper Upper Cover CD33-17K835 OEM

$1500.00




Contact | Copyright Information | Privacy Policy & Terms of Use