DUAL SENSE - Flame sense works through high voltage connector and edge connector simultaneouslyEXTERNAL SENSE -Connector on the board for external sense wireDIAGNOSTIC-AID LED on board is green to show power to boardRed to indicate power to gas valveVOLTAGE REGULATOR -Cleans up the 12 Volt supply powerSize: 3.25 x 4.25 Inches, Fuse & Surge protected, Microcontrolled.
Universal Ignitor Boards will fit most brands of furnaces, refrigerators and water heaters. Match the original by voltage rating and size. Three year registration card included with each board. Small board with spade connector, 12VDC operating voltage. Features 3-try ignition with delay. Measures 3. 25\" x 4. 25\".
Ignition Control Circuit Board; For Coleman/ Duo-Therm/ Hydro-Flame/ Suburban Furnaces And Atwood/ Mor-Flo/ Suburban Water Heaters; 12 Volt DC; With Diagnostic LED; 4-1/4 Inch Length x 3-1/4 Inch Width; With Spade Spark Lead Connectors; Fuse And Surge Protected
These universal 12 Volt DC ignitor boards are certified by Testing Engineers International to meet UL 372 and UL 353 specifications for use in the RV industry. The universal ignitor boards are all \"electrically\" identical but \"mechanically\" different for convenient installation. These rugged boards use double sided-plated thru hole technology for added reliability. They are fused to protect the board from short circuits in the NC and Valve circuitry. A two color LED monitors the NC and valve terminals to let you know when there is power to the board - \"GREEN\" and when there is power for the Valve - \"RED\". These delayed 3-try ignitor boards with 20 Second purge cycles and LOCAL flame sense also incorporate an option jumper. Removal of the jumper, for water heater and refrigerator use only, converts the board to instant fire with one Minute purge cycle between the three ignition tries.
