Fast-Autos.net


Search for a different part:

HANGKAI 2/4Stroke 6-12 HP Outboard Motor Air/Water Cooling Fishing Boat Engine For Sale - New and Used


HANGKAI 2/4Stroke 6-12 HP Outboard Motor Air/Water Cooling Fishing Boat Engine
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

HANGKAI 2/4Stroke 6-12 HP Outboard Motor Air/Water Cooling Fishing Boat Engine:
$205.00

6-18 HP 2/ 4Stroke Water Air Cooling HANGKAI Outboard Motor Fishing Boat Engine

Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.

Don\'t do the following will avoid cylinder Scoring:

1,start the motor on bank

2, use the motor when it stop coming out of water

Even if you want test the motor, it should be done in the river!

1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon
2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed
3.It can be marched with inflatable boats, rubber boats or fishing boats
4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boatMODEL ONE: 3.5HP & 2-Stroke(TYPE ONE)

Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us).our outboard motor doesn\'t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

SKU:OT-028

Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode


STRICTLY FOR PROFESSIONAL USE ONLY
Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)
We don\'t supply wearing parts (pull starter)for free.
If you want buy one please click:Description:
Overall length:92CM
Overall widteh:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/minMAX SPEED:4000~5000rpmMaximum shaft :40cm
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 35:1 (Please be suject to this version, and disregard the manual about this point)
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
When at normal cruising, the appearance of the seventh picture. Falling back the boat, the appearance of the outboard motor likes the eighth picture . Falling back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve 180 and the operation handle face back, the boat can fall back to drive.
Announcements:
After in the sea water or turoffer water cruising
1.Use the fresh water cleaning the outboard motor
2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3.Before completely running out cooling water,don\'t put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.
4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.
5.Before the long term storing,you should run out of the gasoline in the fuel tank.
MODEL TWO: 3.6HP & 2-Stroke

Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us).our outboard motor doesn\'t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

SKU:OT-ML-132

Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode

STRICTLY FOR PROFESSIONAL USE ONLY
1.Start-In-Gear protection/clutch feature prohibits prop rotation while idling2.Lift/Tilt feature for shallow water operation and convenience3.Features 360 degree steering rotation for reverse without gear shifting4.Superior engine water cooling system for improved engine performance5.Easy pull off engine cover with push button latch for instant motor accessProduct DescriptionMAX SPEED:4000~5500rpmShort shaft :40cm Features: Features 360 degree steering rotation for reverse without gear shifting . Start-In-Gear protection/clutch feature prohibits prop rotation while idling . Lift/Tilt feature for shallow water operation and convenience . Superior engine water cooling system for improved engine performance . Easy pull off engine cover with push button latch for instant motor access . Standard CDI ignition system for easy starting and improved performance . Vertical mount engine design for increased power, performance and durability . Superior carbonation system with primer bulb for increased efficiency . Twist grip throttle handle and engine stop button for improved response . Superior outboard anti corrosion system and anodes for increased durability . Durable cast Nylon plastic construction for superior corrosion protection . Through the prop exhaust outlet for decreased noise and pollutant . Heavy duty lightweight Nylon plastic cast propeller is standard equipment

Shipping Weight: 21.4 pounds


MODEL THREE:3.5HP & 2-Stroke (TYPE TWO)

Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn\'t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

SKU:OT-ML-279

Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode

Please Notice:STRICTLY FOR PROFESSIONAL USE ONLY

What you will receive is our new version of this boat engine

The trademark will be Yadao instead of Speeda.

Overall length:92CM
Overall widteh:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min

MAX SPEED:4000~5000rpm
Maximum people)
Type:2-strokeShort shaft :40cmIgnition system:CDI system
Starting system:Manual start
Staring carburetion system:Choke start]
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel:Regular unleaded gasoline
Fuel to oil ratio: 35:1 (Please be suject to this version, and disregard the manual about this point)
Gear ratio: 27/13
When at normal cruising,the appearance ofthe seventh picture. Falling back the boat, the appearance of the outboard motor likes theeighth picture . Falling back the boat, you shoulddrive slowly otherwise the boat will not stable. Theoutboard motor backet can revolve 360. Only in
simple let the engine revolve 180 and the operation handle face back,the boat can fall back to drive.
Announcements
After in the sea water or turoffer water cruising
1.Use the fresh water cleaning the outboard motor
2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3.Before completely running out cooling water,don\'t put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the
air cylinder, from that will cause the engine breakdown.
4.The engine should deposit in the aridity and ventilatedwell place,avoid exposing directly in the sunshine.
5.Before the long term storing,you should run out of the gasoline in the fuel tank.MODEL FOUR:4HP & 4-StrokeOT-ML-277Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn\'t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

About certification:We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.STRICTLY FOR PROFESSIONAL USE ONLYType: 4 stroke 4 horsepowerShort shaft :40cm
Capacity: 52cc
Transmission ratio: 2.08 (27:13)
The number of cylinders: 1
MAX SPEED:4500~5500rpm
Maximum power: 2.8 kW /4 HP
Shift position: clutch control
Package volume: 95x40x30 cm
Ignition system: CDI
Cooling system: air cooling
Starting method: Manual start
Refueling: No. 93 gasoline
Propeller size: 7 1/4X7-A
The maximum fuel consumption: 1.4 liters / hour
Recommended Lubricant:4 stroke lubricating oil
Mixing ratio:Pure gasoline
Trim and tilt system:Manual Tilt
Start-In-Gear protection/clutch feature prohibits prop rotation while idling
convenience
Features 360 degree steering rotation for reverse without gear shifting
Cooling system: air cooling
Easy pull off engine cover with push button latch for instant motor access
MODEL FIVE:6HP & 2-Stroke OT-C001-073

Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn\'t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding

STRICTLY FOR PROFESSIONAL USE ONLY

Technical Parameters

Dimension

Overall length 1040mm(40.9 in)

Overall width 872mm(34.3 in)

Overall height 332mm(13.1 in)

Transom height 44CM(17.3 in)

Short shaft :40cm

Performance

Full throttle operating range 5000-6000r/min

MAX SPEED:4500~5500rpm

Maximum output 4.4KW/6HP

Idling speed ( in neutral) 1000±100 r/min

Engine

Gear positions Forward-neutral-reverse

Gear ratio 2.15(28/13)

Trim and tilt system: Manual tilt

Drive unit

Recommended fuel Regular unleaded gasoline

Integral fuel tank capacity 2.5L

Recommended engine oil 2-stroke outboard motor oil

Engine oil type Genuine or recommended 2str engine oil

Lubrication System Engine oil mixed gasoline

Engine oil mixing ratio Fuel 50: Engine oil 1

Gear oil quantity 195ml(6.6 fl.oz.)

Tightening torque for engine

Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)

Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)

MODEL SIX:7HP & 4-Stroke

OT-ML-278


Notice:
Please add gear oil to the gears before use the motor and replace gear oil after the run-in period (10 hours). (If you do not know how to handle this, please contact with us.)

About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

About the noise:
1. All the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon
2. The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.
3. It can be marched with inflatable boats, rubber boats or fishing boats.
4. Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.

Note:
Must read before use!
Four stroke 7 hp:
Firstly, Fill the gear oil (open gear box lid and fill it).
Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.
Thirdly, Fill engine oil don\'t exceed the head of the pattern.
Forthly, Pull the gear to netural gear, and plug the brake line in, hang the other side of the brake line on your wrist at the same time.
Then, turn the accelerator gets up to 50% and rapidly pull the starter line.
After the motor start , please turn the gear to minimum before put another gear.
Otherwise, the gearwheel will be broken if you put high gear.

Description:
Universal motors, high performance, reliable quality
· Perfect match inflatable boats, fishing boats, sailboats, and small yachts.
· Economical and compact structure. Durable, lightweight and anti-corrosive construction.
· Maneuverable and safe twist grip throttle control.
· Suitable for: Freshwater and saltwater
· One year warranty covers the motor, to provide parts free
Type: 4 stroke 7 horsepower
Capacity: 196CC
Transmission ratio: 2.08 (27:13)
The number of cylinders: 1
Maximum speed: 4500-6000rpm
Maximum power: 5.1 kW /7 HP
Shift position: clutch control
Package volume: 120x60x42.5 cm
Ignition system: TCI
Cooling system: air cooling
Starting method: hand start
Refueling: No. 93 gasoline
Propeller size: 3-7 1/2\'\'x5\'\'
Gear position: F-N-R
Control system: Tiller control
N.W./G.W.: 26.7/31.7kgs
Recommended Lubricant: 4 stroke lubricant oil
Trim and tilt system: Mannual tilt
Standard fuel tank capacity: 1.4L/within
long shaft :50.8CMMODEL SEVEN: 6.5 HP & 4-Stroke
OT-ML-282

Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn\'t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

The Hangkai 6.5 hp 4-stroke provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport! With all of this available at a competitive price, it is no wonder this little outboard receives so much attention and praise!

Brand: HANGKAI
Displacement: 123CC
Gear ratio: 2.08(27:13)
Cylinder: 1
Max.Output(kw): 4.8
Max.speed(r/min): 5000-6000
Gear Positions: F-N-R
Packing size: 114x64x41cm
Ignition System: CDI
Cooling System: Water-cooling

Short shaft :40cm
Control System: Tiller control
Starting System: Manual start
Control System: #93 gasoline
N.W./G.W.(kgs): 26/31.2
Bore x Stroke(mm): 59x45
Recommended Propeller range: 3 -7\"x9\"
Recommended Lubricant: Four Stroke Lubricating oil
Mixing ratio: Pure gasoline
Trim and tilt system: Manual Tilt
Overall LxWxH(cm): 78.3x34.3x103.9
Standard fueel tank capacity: 12L
Optional fuel tand capacity: /

Bonus accessories:

brochures, tubing, cotter pins

Pump impeller, start rope, start key

12 liter fuel tank, tool kit, spark plug, cylinder head pad

CharacteristicConvenient Use,Easy Operation,Easy installation1FeaturesWide Application,Novel Appearance,100%Brand New,High QualityWarranty.3 Years*Feature*Creative Design,Durable Material,BeautifulHighlightsCompact Design,Unique Appearance,high reliabilityMPNDoes Not Applyreverse gearwithoutMake/Overall length83cm(32.68inch)Boat & Watercraft TypeOutboard MotorsFeature 1Easy installation,Convenient Use,Easy OperationUPCDoes not apply

Buy Now



Search for a different part:


Related Cars:



2005 Noble M400
2005 Noble M400

2007 Jaguar C-XF Concept
2007 Jaguar C-XF Concept

2001 Mercedes-Benz SLK 32 AMG
2001 Mercedes-Benz SLK 32 AMG

2000 Ascari KZ-1
2000 Ascari KZ-1

2001 Hamann BMW M-Coupe
2001 Hamann BMW M-Coupe

2001 Gemballa GTR 550
2001 Gemballa GTR 550

2008 MTM RS6 R
2008 MTM RS6 R

2006 Saleen S7 Twin-Turbo Competition
2006 Saleen S7 Twin-Turbo Competition

2010 Land_Rover Range Rover Sport Supercharged
2010 Land_Rover Range Rover Sport Supercharged

2010 McLaren MP4-12C
2010 McLaren MP4-12C

Related Items:

HANGKAI 2/4Stroke 6-12 HP Outboard Motor Air/Water Cooling Fishing Boat Engine picture

HANGKAI 2/4Stroke 6-12 HP Outboard Motor Air/Water Cooling Fishing Boat Engine

$199.00



HANGKAI 2/4Stroke 6-12 HP Outboard Motor Air/Water Cooling Fishing Boat Engine picture

HANGKAI 2/4Stroke 6-12 HP Outboard Motor Air/Water Cooling Fishing Boat Engine

$167.00



HANGKAI 6-12/HP Outboard Motor 2/4 Stroke Fishing Boat Engine Water/Air Cooling picture

HANGKAI 6-12/HP Outboard Motor 2/4 Stroke Fishing Boat Engine Water/Air Cooling

$319.05




Contact | Copyright Information | Privacy Policy & Terms of Use