Description Our window regulator offer value without compromising quality. It with premium material and solid construction, ensures high strength and reliability. They direct fit -No missing holes, hardware or mounting brackets. It has been 100% tested for RPM, rotational direction, amperage and torque before shipment.Highlights include - Built to meet or exceed original equipment performance
- Simple electrical plug assembly, no wire splicing necessary
For 08-12 Mitsubishi Lancer Front Right Power Window Regulator & Motor Assembly
Description
Our window regulator offer value without compromising quality. It with premium material and solid construction, ensures high strength and reliability. They direct fit -No missing holes, hardware or mounting brackets. It has been 100% tested for RPM, rotational direction, amperage and torque before shipment.
Highlights include
- Built to meet or exceed original equipment performance
- Simple electrical plug assembly, no wire splicing necessary
- High-quality steel and plastic compounds for greater durability
Your "Right Part" Checklist
Use the compatibility chart to identify your vehicle.
Visually compare the part you are replacing with our pictures.
Match reference numbers from the Item specifics section above.
Find the year,make, model, engine and trim in vehicle application to ensure.
Part Number
Replaces dealer part number:751-781
Fitting for the following vehicles
Mitsubishi Lancer 2012-08 Front Right Side Window Window regulator with Motor in a box
Install the window regulator as the Window from the Motor
1.Remove the interior door panel.
2.Gently remove the plastic door cover.
3.Locate the window mounting bolts.
4.Move the window if necessary to access the bolts.
5.Remove the bolts while a friend supports the window.
6.Raise the window up into the door frame.
7.Use masking tape to secure the window in place.
Part2Disconnecting the Motor and Regulator
8.Remove the window regulator bolts.
9.Locate and remove the window motor mounting bolts.
10.Disconnect the motor wiring harness connector.
11.Remove the motor and regulator through the access port.
12.Connect the regulator to the new motor.
Part3Installing a New Power Window Motor
13.Slide the new motor and regulator back into place.
14.Replace the mounting bolts.
15.Reconnect the electrical connector.
16.Remove the masking tape and lower the window back down.
17.Insert the window mounting bolts.
18.Reinstall the plastic liner and interior product is covered by our1-yearwarranty.
If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge
Item SpecificsBrand X-engineclubType Regulator & Motor AssemblyOperating Mode ElectricOE/OEM Part Number 5713A126Placement on Vehicle Front RightManufacturer Part Number XE1115218309CMaterial Stainless SteelVintage Part NoUniversal Fitment NoManufacturer Warranty 1 YearPerformance Part NoInterchange Part Number 751-781Position Passenger SideMounting Hardware Included NoOE Spec or Performance/Custom OE SpecInstructions Included NoNumber of Pieces 1Modified Item NoFitment Type Direct ReplacementAttachment Type Bolt-OnMotor Included Yes Item SpecificsBrand X-engineclubType Regulator & Motor AssemblyOperating Mode ElectricOE/OEM Part Number 5713A126Placement on Vehicle Front RightManufacturer Part Number XE1115218309CMaterial Stainless SteelVintage Part NoUniversal Fitment NoManufacturer Warranty 1 YearPerformance Part NoInterchange Part Number 751-781Position Passenger SideMounting Hardware Included NoOE Spec or Performance/Custom OE SpecInstructions Included NoNumber of Pieces 1Modified Item NoFitment Type Direct ReplacementAttachment Type Bolt-OnMotor Included Yes
Payment WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.1.We only accept PayPal.2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by messages.3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)4.Payment must be received within 10 days as sale ended or order might be delayed.
Shipping 1. Orders processed within 24 hours of payment verification.2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.3. The images shown are not the actual item and are for your reference only.4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!Returns 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.3. We will refund your full winning offer amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from . OR, you may choose to have a replacement.Contact us
You may contact us via message if you have any questions and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)
For 08-12 Mitsubishi Lancer Front Right Power Window Regulator & Motor Assembly
Description
Our window regulator offer value without compromising quality. It with premium material and solid construction, ensures high strength and reliability. They direct fit -No missing holes, hardware or mounting brackets. It has been 100% tested for RPM, rotational direction, amperage and torque before shipment.
Highlights include
- Built to meet or exceed original equipment performance
- Simple electrical plug assembly, no wire splicing necessary
- High-quality steel and plastic compounds for greater durability
Your "Right Part" Checklist
Use the compatibility chart to identify your vehicle.
Visually compare the part you are replacing with our pictures.
Match reference numbers from the Item specifics section above.
Find the year,make, model, engine and trim in vehicle application to ensure.
Part Number
Replaces dealer part number:751-781
Fitting for the following vehicles
Mitsubishi Lancer 2012-08 Front Right Side Window Window regulator with Motor in a box
Install the window regulator as the Window from the Motor
1.Remove the interior door panel.
2.Gently remove the plastic door cover.
3.Locate the window mounting bolts.
4.Move the window if necessary to access the bolts.
5.Remove the bolts while a friend supports the window.
6.Raise the window up into the door frame.
7.Use masking tape to secure the window in place.
Part2Disconnecting the Motor and Regulator
8.Remove the window regulator bolts.
9.Locate and remove the window motor mounting bolts.
10.Disconnect the motor wiring harness connector.
11.Remove the motor and regulator through the access port.
12.Connect the regulator to the new motor.
Part3Installing a New Power Window Motor
13.Slide the new motor and regulator back into place.
14.Replace the mounting bolts.
15.Reconnect the electrical connector.
16.Remove the masking tape and lower the window back down.
17.Insert the window mounting bolts.
18.Reinstall the plastic liner and interior product is covered by our1-yearwarranty.
If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge
Payment WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.1.We only accept PayPal.2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by messages.3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)4.Payment must be received within 10 days as sale ended or order might be delayed.
Shipping 1. Orders processed within 24 hours of payment verification.2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.3. The images shown are not the actual item and are for your reference only.4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! Returns 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.3. We will refund your full winning offer amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from . OR, you may choose to have a replacement. Contact us
You may contact us via message if you have any questions and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)
Copyright of HK-batteries. All rights reserved.
