Fast-Autos.net


Search for a different part:

FORD 6.0 POWERSTROKE DIESEL FUEL INJECTOR CONTROL MODULE FICM F250-550 OR VAN For Sale - New and Used


FORD 6.0 POWERSTROKE DIESEL FUEL INJECTOR CONTROL MODULE FICM  F250-550 OR VAN
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

FORD 6.0 POWERSTROKE DIESEL FUEL INJECTOR CONTROL MODULE FICM F250-550 OR VAN:
$198.00

This sale is for a great completely remanufactured ficm. Our FICMs are inspected and cleaned. Everyficm is opened and inspected internally for signs of damage, overheating, cracking or stress. We do not do a simple resolder job. The weak links are upgraded and improved. Every one we do is programmed, tested and driven on a real vehicle not a simulator. These modules take hours to go through our remanufacture and testing process. Our modules will save you $700-$800 dollars.

It will be a plug and play unit programmed for the year that you specify. Please remember to add notes during checkout about the year you need it for in the message to seller box. . The options are, or what I need to know is: Is it an 03/early 04 with no icp sensor in the passenger valve cover? or an 04 with the icp in the valve cover? or 05 and up. (See attached pictures.) There are three calibrations. Please let me know which year you need it programmed for.

THE FINAL COST IS LESS THAN $200.00 FOR A KNOWN GOOD, UPGRADED, TESTED, PROGRAMMED FICM.. AND IT\'S DELIVERED RIGHT TO YOU. THAT IS A GREAT DEAL. SOME DEALERS CHARGE THAT TO TEST OR REPROGRAM IT. JUNK YARDS CHARGE OVER $300 FOR A USED ONE AND IT STILL MAY NEED PROGRAMMED OR FAIL.

There is a $200.00 core deposit which will be refunded as soon as you send your old core back. The core has to be original and not tampered with or damaged while attempting a repair. It should be repairable or at least not damaged by human hands. If it is burnt up thats okay. But if you opened it and made a failed repair then I cannot fix it now either.. I have to do this because some people are damaging their ficms and giving me back non-rebuildable cores.. There is no need to do this. I have them here so cheap it\'s not worth taking a chance or damaging it. The only way we can sell these at such a low price is to keep flipping them. This is a service I am glad toprovide and thankful that I can. Please do not see this as a negative. It isjust that these modules are over $700 for a replacement. I have dozens of non-rebuildable cores and that hurts. Thank you for your understanding.

 . We inspect/repairevery module.It is then set aside waiting fora customer to request their year and model. After you let us know your year and model the module is installedon a truck,van or Excursion, programed and ran. We monitor the voltage and make sure it stays in specs. Tested for misfires orcodes. You will never get a bad FICM from us.Itwill have46.5 to 49 volts or we junk it. It will not have a problem when it leaves. If a core comes back that had issues other than low voltage, it is not repaired. If the board has any problems more than a shunt resistor it is junked. It is a great alternative from buying a new one. It will come programmed with the latest calibration that can replace either the 4 or 7 pin module. This flash helps to save the module from failing again.

I have included a link to(MY) video on youtube (DIESELTECHRON). I am the tech showing you what to expect and how to diagnose if it is needed. As a certified Ford diesel master-tech I would also like to give you a few pointers. First off this is not a cure-all. If your voltage is low and the engine runs rough or if it is a hard start or even a no startit may and could fix all of your concerns, or you may spend the money and still have a misfire from a sticking injector or other cause. Also you should be aware that these modules normally do not fail without a reason. The main cause that I have found is poor supply voltage. If your batteries are weak or always going dead it stresses your module and no matter how it ismade or rebuilt it will fail again. The module takes 12 volts and amplifies it 4 times. High resistance or low voltage stresses the surface mount shunt resistors and pads on the circuit boards. This causes them to either fail or the solder to melt/crack and come loose. Also the old programming spikes the module all at once. The module I am sending out to you will have the newest programming that was designed to help prevent this. You should hear the injectors cycle at a progressive rate when cold. The 4 pin modulescan beflashed for2003 to 2007 trucks or up to 2010 Econolines. If you are installing it on a 2003 or early 2004 please let me know so I cansend you out the same 7 pin module that is already flashed and ready to install. I have some here ready to go for all years. If you have an early production 2004 and not sure of what flash you need,. look at the passenger side valve cover. If there is a 3 wire sensor on top right in front of the oil fill tube it is thelate build 2004-2007style. If the only thingon top of the valve coveris the glow plug controller then it is the early 2003/2004production. If it was produced prior to Sept 2003 it is most likely the early model. Thank you very much. Any questions, see the pictures or just ask me. I am always here to help..I would also like to point out that we have been fixing these for over 4 years now. We do a lot of local trucks. Wedo dozens a weekfor multiple shops in our area plus here on .. When it leaves our hands we are confident that the module you will receive is going to give you years of reliability and trouble free driving. PLEASE READ THIS PART.......I DO NOT WANT A MISUNDERSTANDING OR UNHAPPY BUYER:WE CAN SEND OUT A COMPLETE FICM TODAY AND WE WILL SEND YOU a  A REQUEST FROM PAYPAL TO COVER THE CORE.. AS SOON AS I RECEIVE YOUR CORE BACK ANDIT IS NOTHACKED UP  WE RELEASE THE DEPOSIT HOLD AND YOU GET YOUR $200.00 RIGHT BACK. PLEASE NOTE, I DO NOT WANT TO KEEP YOUR CORE MONEY. I WANT THE CORE BACK AND I WANT TO REFUND YOUR MONEY SO YOU ARE HAPPY AND TELL OTHERS. I CAN ONLY KEEP MY PRICES LOW BY REBUILDING THESE AND MAKING SURE THE CUSTOMERS ARE HAPPY.... THANK YOU VERY MUCH FOR LOOKING AND CONSIDERING ME TO SUPPLY YOU WITH A FICM. YOU WILL NOT BE DISAPPOINTED.

Posted with Mobile

Posted with MobileO

Posted with Mobile

Posted with Mobile

Posted with Mobile

Posted with for iPad


Buy Now



Search for a different part:


Related Cars:



2008 Audi R8 V12 TDI Concept
2008 Audi R8 V12 TDI Concept

2004 Koenigsegg CCR
2004 Koenigsegg CCR

2010 Mercedes-Benz E63 AMG
2010 Mercedes-Benz E63 AMG

2005 Nissan Sport Concept
2005 Nissan Sport Concept

2008 Mansory McLaren SLR Renovatio
2008 Mansory McLaren SLR Renovatio

2006 Novitec F430_Spider
2006 Novitec F430_Spider

2010 Morgan Aero SuperSports
2010 Morgan Aero SuperSports

2009 Pagani Zonda R
2009 Pagani Zonda R

2009 Roock 911 Turbo RST 600 LM
2009 Roock 911 Turbo RST 600 LM

2006 Chevrolet WTCC Ultra
2006 Chevrolet WTCC Ultra

Related Items:

Intercooler Pipe & Boot Kit+ Cold Air Intake Kits For 03-07 Ford F250 F350 6.0L picture

Intercooler Pipe & Boot Kit+ Cold Air Intake Kits For 03-07 Ford F250 F350 6.0L

$161.39



10X Powerstroke Diesel Oil&Fuel Filter Kit For 03-07 Ford F250 6.0 FD4616 FL2016 picture

10X Powerstroke Diesel Oil&Fuel Filter Kit For 03-07 Ford F250 6.0 FD4616 FL2016

$90.55



Turbo Intercooler Boot Clamp Kit Intercooler CAC Hose For Ford 6.0L Diesel 03-07 picture

Turbo Intercooler Boot Clamp Kit Intercooler CAC Hose For Ford 6.0L Diesel 03-07

$41.99




Contact | Copyright Information | Privacy Policy & Terms of Use