We build it, You drive it.
__
STAGE 1.1
HEAVY-DUTY STREET USE AND OCCASIONAL DRAG / ROAD / DRIFT RACING
The 1MS Stage 3 Performance Disc uses our extremely durable, High Performance MIBA Sprung Ceramic Disc. It is available in a 4 and 6 MIBA Ceramic puck configuration with the 4 puck being the more aggressive of the two. This MIBA Sprung Ceramic Disc is engineered for low/mild horsepower vehicles. Our Stage 3 MIBA Sprung Ceramic Disc creates quick engagement as well as clutch chatter, which should be minimal once proper break-in is completed. Like all of our sprung discs, our Stage 3 kit features our fully enclosed spring retainers to help protect your investment from any springs popping out which can cause catastrophic damage to your transmission or engine as seen with competitors. After each disc is assembled, it goes through multiple quality checks before it is signed off by one of our lead engineers (50+ years combined experience).
Break-in Procedure
500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if Disc Features
- MIBA Friction Ceramic Material Pads
- Sprung Hub For Easy Engagement
- American Grade Rivets
- Engineered for dedicated low to high horsepower street and race vehicles (N/A and Force Induction)
- Rapid Heat Dissipation
- Full Enclosed Spring Retainers vs competitors that are fully exposed springs
- Available in 4/6 Puck Configurations
- Highly Suggested to be used with Action Clutch Pressure Plate
*Ceramic based clutch discs intend to increase the holding capacity and durability of the clutch as opposed to an increased life expectancy. Using a ceramic based material for easy street driving may contribute to premature wear of the clutch kit due to the harsher engagement and because of the higher tendency to slip the clutch in street driving. Ceramic discs are never recommended for stock or lightly modified vehicle applications. Note: clutch chatter is normal on this type of clutch / increased gear rattle
PERFORMANCE DISC ONLY.1MS
Fits 2007 - 2010 Acura CSX Base; Type-S (2.0L DOHC 4cyl; fits all model; Canadian model)
- Fits 2002 - 2006 Acura RSX Base; Type-S (2.0L DOHC 4cyl K20A2, K20A3, K20Z1)
- Fits 2002 - 2011 Honda Civic Si (2.0L DOHC 4cyl K20A3, K20Z3)
ClutchMax clutch discs are sold with the manufacturer warranty of 12 months or 15,000 miles. All warranty claims must be made prior to shipping the product back. The buyer must first contact ClutchAmerica™ to begin the warranty / defective claim process. All warranty claim products for inspection or repair must be sent prepaid, insured and properly packaged. All freight charges (inbound and outbound) for returned products are the sole responsibility of the customer.
Business Hours: 9:00 AM - 5:00 PM, Monday ~ Friday (Pacific Standard Time)
Email: Please contact us through message
We are your No.1 source for all your • Fits 2007 - 2010 Acura CSX Base; Type-S (2.0L DOHC 4cyl; fits all model; Canadian model)
• Fits 2002 - 2006 Acura RSX Base; Type-S (2.0L DOHC 4cyl K20A2, K20A3, K20Z1)
• Fits 2002 - 2011 Honda Civic Si (2.0L DOHC 4cyl K20A3, K20Z3)
Stock images are used, item may differ from your package in looks only, not performance. Just because the item doesn't match the photos used it does not mean its the wrong one, please reach out if you have any questions. There are thousands of clutches in our catalog, therefore stock images are accept Paypal and all Major Credit Cards
All packages are sent via USPS, FEDEX, or UPS
However, once the package gets picked up from our location, we have NO control on how long the carrier takes to deliver the item, at times the terminals can be congested and take up 1-2 day delays.
INTERNATIONAL: All INTL packages are shipped using USPS, all import and duty fee's are buyers responsibility to pay
Express shipping is available upon request
FAQQ: WHAT COMPONENTS ARE INCLUDED WITH Clutch kits come complete with all components necessary to install the clutch. Components bearing, and alignment tool. High quality Japanese pilot bearings are also included in applications that call for such component.Q: IS FLYWHEEL RESURFACING NECESSARY BEFORE INSTALLING A NEW CLUTCH?
A: A smooth, flat flywheel surface is essential for proper clutch subject to heat, scoring, and warping during use. We highly recommend that the flywheel be resurfaced by a reputable automotive machine shop whenever a clutch kit is installed. Resurfacing should be done on a flywheel-grinding machine only. If your flywheel shows any signs of cracking, replace it. Never roughen with sanding as this reduces clutch life. The surfaces are designed to rub against each other (producing friction), not tear into each other.Q: DO ACTION CLUTCHES REQUIRE A BREAK IN PERIOD.
A: Yes, all Action Clutches must undergo a break in process of moderate stop and go driving. We recommend a break in period of 250 miles for organic, 500 for puck discs and 1000 miles for Kevlar discs. Failure to break in the clutch can cause damage to the clutch and will void warranty.Q: WILL PEDAL EFFORT?
A: Action pressure plates are specifically designed to handle high torque applications. With increased clamping force and torque capacity, comes increased pedal pressure. The "1 Series" single diaphragm pressure plates increase pedal pressure vs. OEM by approximately 25%. diaphragm pressure plates increase pedal pressure vs. OEM by approximately 50%.Q: CAN AN ACTION CLUTCH PUCK STYLE DISC BE USED FOR DAILY DRIVING?
A: Puck style discs are very aggressive and offer a no nonsense performance action. The engagement of a puck style disc will be much more aggressive and longevity of the disc is considerably less than a full face disc. The puck style discs are intended for racing applications, but can also be used on street driven vehicles. As a customer you must decide on the trade off between daily driven comfort and performance gains.
Q: IS THERE WARRANTY WITH THE AC KIT?
A: Yes, Action Clutch offers warranty on any defective craftmanship, if something breaks like a rivet, strap, friction plate; Action will warranty it. Action Clutch does NOT warranty any clutches that are burned or over abused
Fits 2007 - 2010 Acura CSX Base; Type-S (2.0L DOHC 4cyl; fits all model; Canadian model) ---Fits 2002 - 2006 Acura RSX Base; Type-S (2.0L DOHC 4cyl K20A2, K20A3, K20Z1) ---Fits 2002 - 2011 Honda Civic Si (2.0L DOHC 4cyl K20A3, K20Z3) ClutchMax clutch discs are sold with the manufacturer warranty of 12 months or 15,000 miles. All warranty claims must be made prior to shipping the product back. The buyer must first contact ClutchAmerica™ to begin the warranty / defective claim process. All warranty claim products for inspection or repair must be sent prepaid, insured and properly packaged. All freight charges (inbound and outbound) for returned products are the sole responsibility of the customer. Business Hours: 9:00 AM - 5:00 PM, Monday ~ Friday (Pacific Standard Time) Email: Please contact us through message We are your No.1 source for all your • Fits 2007 - 2010 Acura CSX Base; Type-S (2.0L DOHC 4cyl; fits all model; Canadian model) • Fits 2002 - 2006 Acura RSX Base; Type-S (2.0L DOHC 4cyl K20A2, K20A3, K20Z1) • Fits 2002 - 2011 Honda Civic Si (2.0L DOHC 4cyl K20A3, K20Z3)
We build it, You drive it.
1.1
HEAVY-DUTY STREET USE AND OCCASIONAL DRAG / ROAD / DRIFT RACING
The 1MS Stage 3 Performance Disc uses our extremely durable, High Performance MIBA Sprung Ceramic Disc. It is available in a 4 and 6 MIBA Ceramic puck configuration with the 4 puck being the more aggressive of the two. This MIBA Sprung Ceramic Disc is engineered for low/mild horsepower vehicles. Our Stage 3 MIBA Sprung Ceramic Disc creates quick engagement as well as clutch chatter, which should be minimal once proper break-in is completed. Like all of our sprung discs, our Stage 3 kit features our fully enclosed spring retainers to help protect your investment from any springs popping out which can cause catastrophic damage to your transmission or engine as seen with competitors. After each disc is assembled, it goes through multiple quality checks before it is signed off by one of our lead engineers (50+ years combined experience).
Break-in Procedure
500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if Disc Features
- MIBA Friction Ceramic Material Pads
- Sprung Hub For Easy Engagement
- American Grade Rivets
- Engineered for dedicated low to high horsepower street and race vehicles (N/A and Force Induction)
- Rapid Heat Dissipation
- Full Enclosed Spring Retainers vs competitors that are fully exposed springs
- Available in 4/6 Puck Configurations
- Highly Suggested to be used with Action Clutch Pressure Plate
*Ceramic based clutch discs intend to increase the holding capacity and durability of the clutch as opposed to an increased life expectancy. Using a ceramic based material for easy street driving may contribute to premature wear of the clutch kit due to the harsher engagement and because of the higher tendency to slip the clutch in street driving. Ceramic discs are never recommended for stock or lightly modified vehicle applications. Note: clutch chatter is normal on this type of clutch / increased gear rattle
STAGE 3PERFORMANCE DISC ONLY.1MS
Fits 2007 - 2010 Acura CSX Base; Type-S (2.0L DOHC 4cyl; fits all model; Canadian model)
- Fits 2002 - 2006 Acura RSX Base; Type-S (2.0L DOHC 4cyl K20A2, K20A3, K20Z1)
- Fits 2002 - 2011 Honda Civic Si (2.0L DOHC 4cyl K20A3, K20Z3)
ClutchMax clutch discs are sold with the manufacturer warranty of 12 months or 15,000 miles. All warranty claims must be made prior to shipping the product back. The buyer must first contact ClutchAmerica™ to begin the warranty / defective claim process. All warranty claim products for inspection or repair must be sent prepaid, insured and properly packaged. All freight charges (inbound and outbound) for returned products are the sole responsibility of the customer.
Business Hours: 9:00 AM - 5:00 PM, Monday ~ Friday (Pacific Standard Time)
Email: Please contact us through message
We are your No.1 source for all your • Fits 2007 - 2010 Acura CSX Base; Type-S (2.0L DOHC 4cyl; fits all model; Canadian model)
• Fits 2002 - 2006 Acura RSX Base; Type-S (2.0L DOHC 4cyl K20A2, K20A3, K20Z1)
• Fits 2002 - 2011 Honda Civic Si (2.0L DOHC 4cyl K20A3, K20Z3)
Payment
We accept Paypal and all Major Credit Cards
Shipping
All packages are sent via USPS, FEDEX, or UPS
However, once the package gets picked up from our location, we have NO control on how long the carrier takes to deliver the item, at times the terminals can be congested and take up 1-2 day delays.
INTERNATIONAL: All INTL packages are shipped using USPS, all import and duty fee's are buyers responsibility to pay
Express shipping is available upon WHAT COMPONENTS ARE INCLUDED WITH Clutch kits come complete with all components necessary to install the clutch. Components bearing, and alignment tool. High quality Japanese pilot bearings are also included in applications that call for such component.Q: IS FLYWHEEL RESURFACING NECESSARY BEFORE INSTALLING A NEW CLUTCH?
A: A smooth, flat flywheel surface is essential for proper clutch subject to heat, scoring, and warping during use. We highly recommend that the flywheel be resurfaced by a reputable automotive machine shop whenever a clutch kit is installed. Resurfacing should be done on a flywheel-grinding machine only. If your flywheel shows any signs of cracking, replace it. Never roughen with sanding as this reduces clutch life. The surfaces are designed to rub against each other (producing friction), not tear into each other.Q: DO ACTION CLUTCHES REQUIRE A BREAK IN PERIOD.
A: Yes, all Action Clutches must undergo a break in process of moderate stop and go driving. We recommend a break in period of 250 miles for organic, 500 for puck discs and 1000 miles for Kevlar discs. Failure to break in the clutch can cause damage to the clutch and will void warranty.Q: WILL PEDAL EFFORT?
A: Action pressure plates are specifically designed to handle high torque applications. With increased clamping force and torque capacity, comes increased pedal pressure. The "1 Series" single diaphragm pressure plates increase pedal pressure vs. OEM by approximately 25%. diaphragm pressure plates increase pedal pressure vs. OEM by approximately 50%.Q: CAN AN ACTION CLUTCH PUCK STYLE DISC BE USED FOR DAILY DRIVING?
A: Puck style discs are very aggressive and offer a no nonsense performance action. The engagement of a puck style disc will be much more aggressive and longevity of the disc is considerably less than a full face disc. The puck style discs are intended for racing applications, but can also be used on street driven vehicles. As a customer you must decide on the trade off between daily driven comfort and performance gains.
Q: IS THERE WARRANTY WITH THE AC KIT?
A: Yes, Action Clutch offers warranty on any defective craftmanship, if something breaks like a rivet, strap, friction plate; Action will warranty it. Action Clutch does NOT warranty any clutches that are burned or over abused
Fits 2007 - 2010 Acura CSX Base; Type-S (2.0L DOHC 4cyl; fits all model; Canadian model)
- Fits 2002 - 2006 Acura RSX Base; Type-S (2.0L DOHC 4cyl K20A2, K20A3, K20Z1)
- Fits 2002 - 2011 Honda Civic Si (2.0L DOHC 4cyl K20A3, K20Z3)
ClutchMax clutch discs are sold with the manufacturer warranty of 12 months or 15,000 miles. All warranty claims must be made prior to shipping the product back. The buyer must first contact ClutchAmerica™ to begin the warranty / defective claim process. All warranty claim products for inspection or repair must be sent prepaid, insured and properly packaged. All freight charges (inbound and outbound) for returned products are the sole responsibility of the customer.
Business Hours: 9:00 AM - 5:00 PM, Monday ~ Friday (Pacific Standard Time)
Email: Please contact us through message
We are your No.1 source for all your • Fits 2007 - 2010 Acura CSX Base; Type-S (2.0L DOHC 4cyl; fits all model; Canadian model)
• Fits 2002 - 2006 Acura RSX Base; Type-S (2.0L DOHC 4cyl K20A2, K20A3, K20Z1)
• Fits 2002 - 2011 Honda Civic Si (2.0L DOHC 4cyl K20A3, K20Z3)